logo
होम उत्पादविद्युत सुरक्षा परीक्षण उपकरण

IEC60335-2-25 Clause 18 Microwave Oven Door Endurance Tester with PLC Control

चीन Pego Electronics (Yi Chun) Company Limited प्रमाणपत्र
चीन Pego Electronics (Yi Chun) Company Limited प्रमाणपत्र
Je viens de recevoir les doigts d Essais, Je suis très संतोषजनक, c est très bien

—— ईएसटीआई गठन

प्रिय एलिस, मशीनें अब अच्छी तरह से काम कर रही हैं। हमारी समस्याओं को हल करने के लिए आपके समर्थन और धैर्य के लिए धन्यवाद और बातचीत में हमें बहुत उपयोगी सुझाव दें। वास्तव में एक अच्छा सहयोग।

—— टीयूवी रीनलैंड प्राइवेट लिमिटेड। लिमिटेड

प्रिय पेनी, हम वास्तव में Pego समूह से कई वर्षों के लिए खरीदने की सराहना करते हैं, सभी उत्पादों को अच्छी गुणवत्ता वाले एम डी आसान ऑपरेशन के साथ आते हैं।

—— LIA Laboratories Limited

मैंने वसंत हथौड़ों को प्राप्त किया है, वे महान हैं!

—— बीएसएच समूह

हां, हमें उनके जैसे प्रोब और हमारे इंजीनियर मिले। धन्यवाद।

—— गामा रोशनी Pty लिमिटेड

वसंत हथौड़ा अच्छा लग रहा है और ठीक काम करता है

—— सिग्मा कनेक्टिविटी

यह पुष्टि करने के लिए है कि आदेश अच्छी तरह से प्राप्त किया गया है और सभी अच्छे क्रम में है। मैं आपको आपकी बहुत ही पेशेवर सेवा के लिए धन्यवाद देता हूं। यह एक सुखद लेनदेन रहा है।

—— गलाघेर समूह

..

—— .

मैं यह ईमेल आपको यह बताने के लिए भेज रहा हूं कि हमें अंशांकन प्रमाणपत्र के साथ 2 पोत प्राप्त हुए हैं।मैं आपको जहाजों की गुणवत्ता और आपके अच्छे काम के लिए धन्यवाद देना चाहता हूं।मैं अन्य विषयों पर आपके साथ काम करने का इंतजार नहीं कर सकता।

—— ब्रांट फ्रांस

हम पुष्टि कर सकते हैं कि यह बहुत अच्छी तरह से काम करता है! अच्छी गुणवत्ता वाले उपकरण के लिए धन्यवाद।

—— पीपीसी (ग्रीस)

मैं अब ऑनलाइन चैट कर रहा हूँ

IEC60335-2-25 Clause 18 Microwave Oven Door Endurance Tester with PLC Control

IEC60335-2-25 Clause 18 Microwave Oven Door Endurance Tester with PLC Control

बड़ी छवि :  IEC60335-2-25 Clause 18 Microwave Oven Door Endurance Tester with PLC Control

उत्पाद विवरण:
उत्पत्ति के प्लेस: चीन
ब्रांड नाम: PEGO Group
प्रमाणन: Third-Lab Calibration Certificate
मॉडल संख्या: पीजी-ET02
भुगतान & नौवहन नियमों:
न्यूनतम आदेश मात्रा: 1 सेट
मूल्य: बातचीत योग्य
पैकेजिंग विवरण: लकड़ी का केस
प्रसव के समय: 25 कार्य दिवस
भुगतान शर्तें: टी/टी, वेस्टर्न यूनियन, मनीग्राम
आपूर्ति की क्षमता: 50 सेट/महीना
विस्तृत उत्पाद विवरण
मानक: IEC60335-2-25:2020 खंड 18 आवेदन: माइक्रोवेव ओवन के द्वार प्रणाली के धीरज का परीक्षण करने के लिए
नियंत्रण प्रणाली: पीएलसी+टच स्क्रीन
प्रमुखता देना:

PLC Control Microwave Oven Door Endurance Tester

,

Vacuum Suction Cup Door Endurance Tester

,

IEC60335-2-25 Clause 18 Electrical Safety Test Equipment

IEC60335-2-25 Clause 18 Microwave Oven Door Endurance Tester PLC Control
The microwave oven door endurance tester is designed to meet the test requirements of IEC60335-2-25:2020 clause 18, ensuring door systems including hinges, microwave seals, and associated parts can withstand wear expected in normal use.
Product Overview
This advanced testing equipment features PLC and touch screen control, allowing preset test angles and speeds. Equipped with a manipulator, it realistically simulates human hands opening and closing microwave oven doors and similar equipment.
Test Principle
The motor-driven mechanical arm operates the microwave door held by a cable wire and temperature rise adhesive, performing reciprocal opening and closing motions at specified speeds and angles to verify the reliability of door systems including hinges, microwave oven seals, and related components.
Key Features
  • PLC and touch screen control system
  • Adjustable door opening/closing speed and angle
  • Manipulator
  • Universal compatibility with left-opening and top-opening doors
  • Automatic stop and alarm system for safety
  • Comprehensive protection systems
Technical Specifications
Number of test station 1
Control mode PLC+touch screen
Drive mode Motor drive
Test speed 6 cycles/min
Door opening and closing angle 0-1400, presetable
Test times 0-999999, presetable
Protection Leakage protection, over-load protection, short-circuit protection
Power power AC220±10%, 50/60Hz
Working condition 5-40℃ (temp.), 20%-80%R.H., 80-106kpa
Dimension and weight L1000mm*D1000mm*H800mm/130KG

रेटिंग और समीक्षा

समग्र रेटिंग

5.0
इस आपूर्तिकर्ता के लिए 50 समीक्षाओं पर आधारित

रेटिंग स्नैपशॉट

निम्नलिखित सभी रेटिंग का वितरण है
5 सितारे
100%
4 सितारे
0%
3 सितारे
0%
2 सितारे
0%
1 सितारे
0%

सभी समीक्षाएँ

J
Jorge Morera
Colombia Feb 26.2025
The pots have arrived. We will do the pilot test next week. They looks great, thank you very much.
J
Johan KAES
France Feb 21.2023
I am sending this email to let you know that we receive the 2 vessels with the calibration certificate. I would like to thank you for the quality of the vessels and for your good work. I can’t wait to work with you on other topics.
T
TUV Rheinland
India Jan 8.2020
Dear Alice, The machines are working well now. Thank you for your support and patience to solve our problems and give us very useful suggestions in negotiation. Really a good cooperation.
सम्पर्क करने का विवरण
Pego Electronics (Yi Chun) Company Limited

व्यक्ति से संपर्क करें: Ms. Penny Peng

दूरभाष: +86-18979554054

फैक्स: 86--4008266163-29929

हम करने के लिए सीधे अपनी जांच भेजें (0 / 3000)

अन्य उत्पादों